Anchor-seal, Inc.
anchor-seal  
Anchor-Seal, Inc.

Anchor-Seal Shore ʻAʼ Flexible Polyurethane Elastomers
Fast set, high performance, hand or machine casting resins requiring fast demold without sacrificing physical properties

Product #

Color

Shore
Hardness
 Working Time
100 Grams
@77F		 Demold Time
@ 77F
Depending
On Mass		 Shrinkage
(in/in)		 Viscosity
@ 25C
CPS		 Mix Ratio
By Weight
(By Volume)

U1040AF
Amber Transparent

 40A 10 minutes 2-4 hours 0.006 1300 32 : 100
MSDS Sheets:   U1040AF - Pt A,   U1040AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1045AF
Amber Transparent

 45A 10 minutes 2-4 hours 0.006 1300 34 : 100
MSDS Sheets:   U1045AF - Pt A,   U1045AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1050AF
Transparent

50A 10 minutes 2-4 hours 0.006 1300 100 : 86
MSDS Sheets:   U1050AF - Pt A,   U1050AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1055AF
Transparent

 55A 10 minutes 2-4 hours 0.006 1300 100 : 83
MSDS Sheets:   U1055AF - Pt A,   U1055AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1060AF
Amber Transparent

60A 10 minutes 2-4 hours 0.006 1300 100 : 78
MSDS Sheets:   U1060AF - Pt A,   U1060AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1065AF
Transparent

65A 10 minutes 2-4 hours 0.006 1300 100 : 74
MSDS Sheets:   U1065AF - Pt A,   U1065AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1070AF
Transparent

70A 10 minutes 2-4 hours 0.006 1300 100 : 70
MSDS Sheets:   U1070AF - Pt A,   U1070AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1075AF
Transparent

 75A 10 minutes 2-4 hours 0.006 1300 100 : 69
MSDS Sheets:   U1075AF - Pt A,   U1075AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal

U1080AF
Amber Transparent

 80A 10 minutes 2-4 hours 0.006 1300 100 : 86
MSDS Sheets:   U1080AF - Pt A,   U1080AF - Pt B Good Elongation, Fast Rebound, High Tear and Excellent Tensile Strength
Anchorseal
Pot life, gel time, cure time, and demold time vary depending on quantity mixed, thickness of casting and mold temperature. Use of heated molds accelerates curing. Low temperatures will slow the curing and extend demold time. Read label, Technical Data and Material Safety Data Sheet before use.